dCS 904 User Manual | Manual for Software Version 1.5x and 1.36 |
dCS Ltd | June 2000 |
|
|
OPTIONS
Mains Voltage
We ship with the mains wired according to the destination. The voltage option should be specified when the unit is ordered, by specifying the country of use. It can be updated later by your dealer, if necessary.
Video Frequency VCXOs
We can fit additional video frequency VCXOs (enabling frequencies such as 44.056 kS/s and 47.952 kS/s). These are best fitted at dCS, to allow full checking.
P3D, DSD Pro and Other Formats
We can fit larger FPGAs to allow P3D, DSD Pro and other formats. This has to be done at dCS.
Ordering Options For A New Unit
To order any option, just tell us:
dCS 904 for use in <country>, with options ….
IMPORTANT! Always specify the intended country of operation, otherwise we will assume that country of delivery is the same as country of operation.
Having Your Options Changed
dCS support modifications, updates and option changes to supplied dCS 904 units. If you are in any doubt, please contact your Distributor or dCS. In general, these will be carried out at dCS, because we have extensive test facilities and can verify the changes.
IMPORTANT! Please do not attempt the changes yourself. The unit's performance and reliability may be impaired, and the warranty will be invalidated.
Manual part no: DOC135904 iss 2B2 | Page 68 | 135904ma2b2.pdf file available from website |
Contact dCS on + 44 1799 531 999 | email to: more@dcsltd.co.uk |
(inside the UK replace + 44 with 0) | web site: www.dcsltd.co.uk |