26

How to recognize a fault code

When a fault has occurred, the DishDrawer® will continuously beep every second.
The fault code will be displayed on the wash program selector.
Each fault code is shown in the following chart.

How to attend to a fault code

1
Press the button to remove the fault code.
2
If the fault code and continuous beeps cannot be removed by pressing the button, turn the
DishDrawer® off at the power supply.
3
We recommend you check the following chart and correct the fault where possible.
4
After attending to the fault, turn the DishDrawer® on at the power supply.
5
If the fault code and continuous beeps remain, turn the water and power supply off to the
DishDrawer®.
6
When calling your Authorized Service Center, advise them of the fault code that has appeared
on the DishDrawer®. This information will help the Authorized Service Center respond to your
request.
Fault codes
US
CA