Dell 1090 manual Display Bezel, Removing the Hinge Caps, Replacing the Hinge Caps

10.Replace the keyboard (see Replacing the Keyboard).

11.Replace the label door (see Replacing the Label Door).

CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer.

Hinge Caps

Removing the Hinge Caps

1.Follow the instructions in Before You Begin.

2.Remove the display assembly (see Removing the Display Assembly).

3.Press and lift the hinge caps to release the hinge-cap tabs from the display frame. Note the routing of the cables that are routed beneath the hinge caps.

1 hinge caps (2)

Replacing the Hinge Caps

1.Place the cables in position over the display hinges.

2.Place the hinge caps in position and snap them into place.

3.Replace the display assembly (see Replacing the Display Assembly).

CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer.

Display Bezel

Removing the Display Bezel

1.Follow the instructions in Before You Begin.

2.Remove the display assembly (see Removing the Display Assembly).

3.Remove the hinge caps (see Removing the Hinge Caps).