Light Pattern

Problem Description

Suggested Resolution

 

 

 

 

A possible expansion card failure has

1 Determine if a conflict exists by

 

occurred.

removing a card (not a graphics card)

A B C

D

and restarting the computer (see

page 58).

2 If the problem persists, reinstall the card that you removed, remove a different card, and then restart the computer.

3 Repeat this process for each card. If the computer starts normally, troubleshoot the last card removed from the computer for resource conflicts (see "Resolving Software and Hardware Incompatibilities" on page 46).

 

4

If the problem persists, contact Dell

 

 

(see page 93).

 

 

Another failure has occurred.

• Ensure that the cables are properly

 

 

connected to the system board from

A B C D

 

the hard drive, CD drive, and DVD

 

drive (see page 54).

• If there is an error message on your screen identifying a problem with a device (such as the floppy drive or hard drive), check the device to make sure it is functioning properly.

• The operating system is attempting to boot from a device (such as the floppy drive or hard drive); check system setup (see page 82) to make sure that the boot sequence is correct for the devices installed on your computer.

• If the problem persists, contact Dell (see page 93).

= yellow = green = off

Advanced Troubleshooting

37

Page 36 Page 38
Page 37
Image 37
Dell Dimension B 110 Determine if a conflict exists by, Restarting the computer see, See, Hard drive, CD drive, and DVD
Page 36 Page 38
Top Page Image Contents