drive

securing screw

extra alignment screws (2 or 4)

alignment screws (2)

4After the drive is in place, apply pressure to ensure that the drive is fully seated.

5Use the securing screw that came with the drive to attach the drive to the computer.

NOTICE: Match the colored strip on the cable with pin 1 on the drive (pin 1 is marked as "1").

6Connect the power cable to the system board (see page 54).

7Locate the data cable from the CD or DVD drive in the upper drive bay and connect its middle data connector to the new drive.

power cable

first CD/DVD connector (primary drive)

second CD/DVD connector (secondary drive)

Removing and Installing Parts

75

Page 75
Image 75
Dell Dimension B 110, 1100 manual Drive Securing screw, Power cable