Back to Contents Page
Camera Board
Dell™ Inspiron™ 11 Service Manual
Removing the Camera Board
Replacing the Camera Board
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not covered by your warranty.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).
CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside the computer.
Removing the Camera Board
1.Follow the procedures in Before You Begin.
2.Remove the battery (see Removing the Battery).
3.Remove the keyboard (see Removing the Keyboard).
4.Remove the palm rest (see Removing the Palm Rest).
5.Disconnect the speaker cable from the speaker cable connector on the I/O board (see Removing the Speakers).
6.Remove the hard drive (see Removing the Hard Drive).
7.Remove the memory module (see Removing the Memory Module).
8.Remove the palm rest bracket (see Removing the Palm Rest Bracket).
9.Remove the display assembly (see Removing the Display Assembly).
10.Remove the hinge caps (see Removing the Hinge Caps).
11.Remove the display bezel (see Removing the Display Bezel).
12.Remove the display panel (see Removing the Display Panel).
13.Disconnect the camera cable from the connector on the camera board.
14.Lift the camera board off the display back cover.
1 | camera cable connector | 2 | camera board |
