1 | media buttons board | 2 | screw | 3 | grips (5) |
|
|
|
|
|
|
12.Slide the media buttons board left to release it from the grips and lift the media buttons board.
13.Rotate the LCD assembly upward for easy removal.
14.Lift the display assembly straight up and out of the computer.
1 | screws (2) | 2 | main battery bay | 3 | bottom of the system |
|
|
|
|
|
|
1 | screws (2) | 2 | back of the system | 3 | hinge covers (2) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Replacing the Display Assembly
CAUTION: Before you perform any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface, such as the back panel on the computer.
1.Follow the instructions in Before You Begin
2.Follow the instructions in Removing the Display Assembly.
3.Align the new display assembly over the screw holes in the base of the computer.
4.Replace the two M2.5 x
