1-12 Rack Installation Guide
Removing the Doors From the 42-U RackIf you are installing the rack kit into a PowerEdge 4210 rack, refer to the documenta-
tion provided with that rack for instructions on removing the doors.
CAUTION: To prevent personal injury due to the size and weight of the
doors, never attempt to remove the doors by yourself.
CAUTION: Store the two doors where they will not injure someone if the
doors accidently fall over.
1. Open the latch on the front door (see Figure 1-8).
Slide the button cover up as far as it will go, press the push button, rotate the
handle clockwise until the latch releases, and then pull the door open.
Figure 1-8. Opening the 42-U Rack Door
push button
push-button
cover
handle