Replacing the Keyboard

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance.

Procedure

NOTE: If you are installing a new keyboard, fold the cables the same way they are folded on the old keyboard. For more information, see “Folding the Keyboard Cables”.

1Slide the keyboard cable and keyboard-backlight cable into the system board connectors and press down the latches to secure the cables.

2Turn the keyboard over, slide the tabs on the keyboard into the slots on the palm-rest assembly, and snap the keyboard into place.

Folding the Keyboard Cables

NOTE: Keyboard-backlight cable is present only on a backlit-keyboard.

34

Page 34
Image 34
Dell 9264, 17-5748, P264001 owner manual Replacing the Keyboard, Folding the Keyboard Cables