w w w . d e l l . c o m s u p p o r t . d e l l . c o m
CAUTION: Safety Instructions (continued)
•Before working on the rack, make sure that the stabilizers are secured to the rack, extended to the floor, and that the full weight of the rack rests on the floor. Install front and side stabilizers on a single rack or front stabilizers for joined multiple racks before working on the rack.
•Always load the rack from the bottom up, and load the heaviest item in the rack first.
•Make sure that the rack is level and stable before extending a component from the rack.
•Do not overload the AC supply branch circuit that provides power to the rack. The total rack load should not exceed 80 percent of the branch circuit rating.Check the voltage rating before you connect the equipment to the power source to ensure that the required voltage and frequency match the available power source.
•Do not use equipment power cables if the power cable is damaged. Use only with 40W of power supply (Liteon
•Ensure that proper airflow is provided to components in the rack.
•Do not step on or stand on any component when servicing other components in a rack.
•For PLUGGABLE EQUIPMENT, the
Instruction
Overview
This product outlines the specifications for the
Features
This product has the following features:
Ta b l e 1 - 1 . Fe a t u r e s
Feature | Description |
|
|
Optimal resolution and refresh | 1280 x 1024 at 60 Hz |
User ’s Guide
