Dell 2300MP specifications Set Time Min, Auto Source, Eco Mode, Language Menu

Using Your Projector: Dell 2300MP Projector

Use this function to select the power saving delay period. Press "Yes" to go into the "set time" sub menu.

Set Time (Min)

Set the power saving delay period as you prefer. When the projector is not receiving an input signal for the selected period of time, the projector will automatically enter power saving mode, and turn off the lamp. After a one-minute cooling period, the projector will turn back on with detection of an input signal or by pressing the "Power" button. After two hours the projector will turn off and must be turned on by pressing the power button on the control panel or remote.

Auto Source

The projector will always automatically search for available input signals when Auto Source is On, which is the default setting. Press the Source button with Auto Source On to automatically search for the next available input signal. Selecting Off will lock on the current input source. Set Auto-Sourceto Off to step through the different input signals manually.

Eco Mode

Select On to operate the projector in lower power (150 Watts) for providing longer lamp life and quiter operation with dimmer luminance output on the screen. Select Off to resume the operation in normal power (200 Watts).

Language Menu

file:///C/Venkat%20Shared/Projectors/2300MP/EN/usage.htm[11/30/2012 2:18:57 PM]