Back to Contents Page
Operating the Monitor Dell™2408WFPFlatPanelMonitorUser'sGuide
Using the Front Panel Controls
Using the On-Scree Display (OSD) Menu
Setting the Optimal Resolution
Using the Dell Soundbar (Optional)
Using the Tilt, Swivel and Vertical Extension
Rotating the Monitor
Adjusting the Rotating Settings of Your Operating System
Using the Front Panel
Usethebuttonsonthefrontofthemonitortoadjusttheimagesettings.
A
Input Source Select
Use Input Source Select button to select between two different video signals that may be connected to your monitor.
lVGA input
lDVI-D 1 input
lDVI-D 2 input
lDisplayPort input
lHDMI input
lComponent video input
lS-Video input
lComposite video input
As you cycle through the inputs you will see the following messages to indicate the currently selected input source. It may take a few
seconds for the image to appear.
If either VGA or DVI-D input is selected and both VGA and DVI-
D cables are not connected, a floating dialog box as shown below appears.
If either S-
Video, Composite, HDMI or Component input is selected and the cables are not connected or the video source is turned off, the
screen does not have an image. If any button is pressed (except power button), the monitor displays the following message:
or
or
or
or
or