OSD Warning Messages
PIP Position
Brightness
PIP/PBP Contrast
PIP/PBP Hue/Tint
PIP/PBP Saturation
Exit Menu
Select PIP window position.
Use and tobrowseand to select.
Adjust the brightness level of the picture in PIP/PBP Mode.
reduce the brightness
increases the brightness
Adjust the contrast level of the picture in PIP/PBP Mode.
reduce the contrast
increases the contrast
This function shifts the color of PIP/PBP image to green or purple. This is used to adjust for desired flesh tone color.
shifts image color towards green
shifts image color towards purple
Adjust the color saturation of PIP/PBP image.
makes the image look more monochrome
makes the image look more colorful
Push to exit the OSD main menu.
When the monitor does not support a particular resolution mode you will see the following
message :
This means that the monitor cannot synchronize with the signal that it is receiving from the
computer. See Monitor SpecificationsfortheHorizontalandVerticalfrequencyrangesaddressable
by this monitor. Recommended mode is 1920 X 1200.
WhenmonitorentersPowerSavemode,thefollowingmessageappears:
Activate the computer and wake up the monitor to gain access to the OSD
If you press any button other than the power button one of the following messages will appear depending on the selected input:
VGA/DVI-D input
Video Input
or
In PIP mode, when the monitor does not sense the selected second signal input, one of the following messages will appear depending upon the selected input
as long as the OSD screen is closed.
1.VGA
2. DVI-D 1
3. DVI-D 2
4.HDMI
or
or
or
5. DisplayPort
6. S-Video
7. Composite
8. Component