Vertical Extension
Standextendsverticallyupto100mmviatheLockdown/releasebutton.
Before you rotate the monitor, your monitor should be fully vertically extended (Vertical Extension) and fully tilted (Tilt) up to avoid hitting the bottom edge of
the monitor.
NOTE: If you monitor gets locked down:
1.
Push the monitor down.
2.
Press the Lock down/release button on the bottom rear of stand to unlock the monitor.
3.
Lift the monitor up and extend the stand to the desired height.
NOTICE: Before relocating or moving the monitor to a different location, make sure that the stand is locked down. To lock it down, lower the height of
the panel until it clicks and is locked into place.