Back to Contents Page
Setting Up the Monitor

Dell™2408WFPFlatPanelMonitorUser's Guide

Attaching the Stand
Connecting the Monitor
Organizing Your Cables
Attaching the Soundbar (optional)
RemovingtheStand

Attaching the Stand


Place the stand on a flat surface and follow these steps to attach the monitor stand:
1. Fit the groove on the back of the monitor to the two tabs on the upper part of the stand.
2. Lower the monitor so that the monitor mounting area snaps on to or locks on to the stand.

Connecting Your Monitor

To connect your monitor to the computer perform the following steps/instructions:
lTurnoffyourcomputeranddisconnectthepowercable.
lConnect either the white (digital DVI-D) display connector cable, the blue (analog VGA) display connector cable or the black DisplayPort cable to the
correspondingvideoportonthebackofyourcomputer.Donotuseall the cables on the same computer. Use all the cables only when they are
connectedtodifferentcomputerswithappropriatevideosystems.
Connecting the white DVI cable
NOTE: The stand is detached when the monitor is shipped from the factory.
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions.