172 장치 시작 및 구성
마법사 단계 3다음과 같은 메시지가 표시됩니다.
Next, an IP address is setup. The IP address is defined on the
default VLAN (VLAN #1), of which all ports are members. This is the
IP address you use to access the CLI, Web interface, or SNMP
interface for the switch.
To setup an IP address:
Please enter the IP address of the device (A.B.C.D):
Please enter the IP subnet mask (A.B.C.D or /nn):
IP 주소 및 IP 서브넷 마스크를 입력합니다. 예를 들어 IP 주소로 192.168.1.100을 입력하고 IP 서브넷
마스크로 255.255.255.0을 입력합니다.
Enter를 누릅니다.
마법사 단계 4다음과 같은 메시지가 표시됩니다.
Finally, setup the default gateway. Please enter the IP address of
the gateway from which this network is reachable (e.g. 192.168.1.1):
기본 게이트웨이를 입력합니다.
Enter를 누릅니다. 다음 메시지가 표시됩니다(위의 예와 같이 입력한 경우):
This is the configuration information that has been collected:
SNMP Interface = "Dell Network Manager"@192.168.1.10
User Account setup = admin
Password = **********
Management IP address = 192.168.1.100 255.255.255.0
Default Gateway = 192.168.1.1