Toolkit Components | Purpose |
|
|
RaidcfgErrorCodes.txt | Lists the error codes and messages for the raidcfg tool. |
stsvc.ini | Configuration file used by raidcfg. |
syscfg | • Reports and configures BIOS, BMC, and DRAC. |
| |
| • Maintains the system state between reboots. |
| • Reports hardware devices and other |
SyscfgErrorCodes.txt | Lists the error codes and messages for the syscfg tool. |
sys.ini | A .ini file used with syscfg. |
UpinitErrorCodes.txt | Lists the error codes and messages for upinit.sh. |
Sample Configuration Files For Windows
The following table describes examples of Windows configuration files used to perform a scripted deployment. The Windows files for
•\Dell\x32\Toolkit\Template\Configs
•\Dell\x64\Toolkit\Template\Configs
NOTE: All configuration files are provided as examples only. These sample configuration files must be edited before they can be used in any deployment tasks.
Table 8. Sample Configuration Files for Windows
Toolkit | Purpose | Location |
Components |
|
|
raccfg.ini
raidcfg.ini
winbom.ini
winpeoem.sif
Sample configuration file for DRAC 4 remote | \Toolkit\Systems\<system> |
access controllers. |
|
Sample output file to enable RAID replication. | \Toolkit\Systems\<system> |
Sample file used to start the racsvc and | \Toolkit\Template\Configs |
mr2kserv services. |
|
Sample file to add support for Dell mass | \Toolkit\Template\Configs |
storage drivers. |
|
Sample Configuration Files For Linux
The following table describes examples of Linux configuration files used to perform a scripted deployment. The Linux files are located at opt/dell/toolkit/template/configs.
NOTE: All configuration files are provided as examples only. The sample configuration files must be edited before they can be used in any deployment tasks.
28
