Dell 4100 Memory Module, Removing the Memory Module Cover, Turn the computer over, and use a, Preparing to Work Inside the Computer

Removing and Replacing Parts: Dell Inspiron 4100

3.Close the display and turn the computer over.4.Slide and hold the latch release, and pull the device out of the module bay.

NOTICE: To prevent damage to devices, place them in a travel case when they are not inserted in the computer. Store devices in a dry, safe place, and avoid pressing down on them or placing heavy objects on top of them.

5. To replace, insert the new device into the bay, and push it until you hear a click.

Memory Module

Removing the Memory Module Cover

NOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries.

NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.

NOTICE: Read "Preparing to Work Inside the Computer" before performing the following procedure.

1.Turn the computer over, and use a flat-blade screwdriver to release the two captive screws from the memory module cover.

2.Remove the M2.5 x 12-mm screw labeled "circle K."

3.Place your finger under the cover at the indentation and lift and slide the cover open.

file:///I/SERVICE%20MANUALS/DELL%20MANUALS/LA...20ok/Inspiron/4100/4100_SERVICE_MAN/remove.htm (14 of 52)6/21/2004 1:02:31 AM