Using the Dell™ Diagnostics: Dell Inspiron 4100

8.Save the settings and exit the system setup program. The computer restarts and runs the Dell Diagnostics.

9.When you have completed running diagnostics, remove the Drivers and Utilities CD.

10.When the computer restarts, press as soon as the Dell logo screen appears, and before the Microsoft Windows logo screen appears.

11.In the system setup program, press until you locate the page with the Boot menu.

12.Reset the boot sequence so that the device noted in step 6 boots first.13.Press to exit the system setup program and restart Microsoft Windows.14.Remove the CD from the drive.

When you start the diagnostics, the Dell logo screen appears, followed by a message telling you that the diagnostics is loading. After the diagnostics loads, the Diagnostics Menu appears.

To select an option from this menu, highlight the option and press , or press the key that corresponds to the highlighted letter in the option you choose.

Diagnostics Menu

OptionFunction

 

 

 

Test All DevicesPerforms extensive diagnostic tests or quick diagnostic tests on all devices.

 

 

Test One DevicePerforms extensive diagnostic tests or quick diagnostic tests on one device

 

after you select it from a list of device groups. After you select Test One

 

Device, pressfor more information about a test.

 

 

Advanced Testing

Allows you to modify the parameters of a test and select a group of tests

 

to perform. You can access online Help for more information about

 

Advanced Testing.

 

 

 

Information and ResultsProvides test results, test errors, version numbers of the subtests used by

 

the Dell Diagnostics, and additional help on the Dell Diagnostics.

 

 

Program OptionsAllows you to change the settings of the Dell Diagnostics.

 

 

Exit to MS-DOSExits to the MS-DOS® prompt.

 

 

 

file:///I/SERVICE%20MANUALS/DELL%20MANUALS/LA...d%20ok/Inspiron/4100/4100_SERVICE_MAN/diag.htm (3 of 6)6/21/2004 1:02:21 AM