Dell 4100 If you cannot eject the CD, CD-RW,or DVD drive tray, If you hear an unfamiliar scraping or grinding sound, If the CD-RWdrive stops writing, standby, Help. See

Solving Problems: Dell Inspiron 4100

Check the drive for errors1.Remove the hard drive.

2.Insert the Drivers and Utilities CD for your computer and turn on the computer.

3.Check to see if the drive light is blinking.

If you cannot eject the CD, CD-RW, or DVD drive tray

1.Ensure that the computer is off.

2.Straighten a paper clip and insert one end into the eject hole at the front of the drive; push firmly until the tray is partially ejected.

3.Gently pull out the tray until it stops.

If you hear an unfamiliar scraping or grinding sound

●Ensure that the sound is not caused by the program that is running.●Ensure that the disk or disc is inserted properly.

If the CD-RW drive stops writing

Disable standby mode in Windows before writing to a CD-RW— Search for the keyword standby in Windows Help. See "Accessing Help Files."

Change the write speed to a slower rate— See the help files for your CD creation software.

Close all other open programs— Closing all other open programs before writing to the CD-RW may alleviate the problem.

If you have problems with a hard drive

Allow the computer to cool before turning it on— A hot hard drive may prevent the operating system from starting. Try allowing the computer to return to room temperature before turning it on.

file:///I/SERVICE%20MANUALS/DELL%20MANUALS/LA...0ok/Inspiron/4100/4100_SERVICE_MAN/solving.htm (14 of 32)6/21/2004 1:02:19 AM