Dell 4100 Remove the, Remove the M2, display assembly, Remove the two M2, Disconnect the bottom, 4.Remove the hinge covers, 3.Remove the display bezel

Removing and Replacing Parts: Dell Inspiron 4100

2.Remove the display assembly.

3.Remove the display bezel.4.Remove the hinge covers.

5.Remove the two M2 x 4-mm screws on the left side of the display panel and the two M2 x 4- mm screws on the right side of the display panel.

HINT: If you have a Hitachi display panel, remove the two M2 x 4- mm screws from the center of the left side of the display panel.

6.Remove the M2 x 4-mm screw that secures the display-feed flex cable to the display assembly through the black plastic flex-cable retention bracket.

7.Lift from the top and rotate the display panel out of the top cover.

8.Disconnect the bottom flex-cable connector from the inverter connector by pulling straight up on the attached pull tab.

file:///I/SERVICE%20MANUALS/DELL%20MANUALS/LA...20ok/Inspiron/4100/4100_SERVICE_MAN/remove.htm (28 of 52)6/21/2004 1:02:31 AM