Dell 4100 Palm Rest, Remove the, hard drive, 2left hinge cover, 1right hinge cover, 2.Remove the keyboard, 1.Remove the hard drive, Preparing to Work Inside the Computer

Removing and Replacing Parts: Dell Inspiron 4100

1right hinge cover2left hinge cover

Palm Rest

NOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries.

NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.

NOTICE: Read "Preparing to Work Inside the Computer" before performing the following procedure.

1.Remove the hard drive.

2.Remove the keyboard.

NOTICE: You must remove the display assembly before you remove the palm rest; the display hinges pass through the back of the palm rest.

3.Remove the display assembly and hinge covers.

4.Turn the computer over and remove the three M2.5 x 12-mm screws labeled "circle P."

file:///I/SERVICE%20MANUALS/DELL%20MANUALS/LA...20ok/Inspiron/4100/4100_SERVICE_MAN/remove.htm (33 of 52)6/21/2004 1:02:31 AM