Removing and Replacing Parts on the Mini Tower Chassis 5-21
([SDQVLRQ&DUGV
T here are seven expansion-card connectors on the system board (see
Figure 5- 18). Expansi on-card connectors PCI1 thr ough PCI5 support 32-bit PCI
e xpansion cards; expansion-card connector AGP supports a 32-bit AGP expan-
sion card; and e xpansion-card connector IS A1 can accommodate an 8- or 1 6-bit
ISA ex pansion card.
NOTES: Connector ISA1 shares expansion-card slot space wit h connector
PCI5. Therefore, only one card of either type can be installed in this slot .
PCI4 has a connector extension to support a PCI RAID controller (see
Figure 5-17 for the location of the PCI connectors).
Follow this general procedure to remove an expansion card:
expansion ca rd card- edge
connector
expansio n- car d
connectors (7)
mounting bracket
screw