System Setu p Program A-3
Time Resets time on system’s internal clock.
Date Resets date on system’s internal calendar.
Diskette Drive A
Diskette Drive B Identi fi es type of disk ette drives i n stalled.
Driv es:
Primary
Secondary
Identifies driv es at tac hed to the IDE1 and I DE2
connectors on system board. Each EIDE con-
nector supports two EIDE drives (Drive 0 and
Drive 1).
F or EIDE hard- disk drives, the system pro vides
an automatic drive-type detect feature. To use
this feature, highl ight the appropriate drive cat-
egor y and t ype a (for
automatic
).
If none of the s upported driv e types matc h t he
parameters of the new drive, enter the param-
eters dire ctly. To do so, highlight the
appropriate drive category ( D r i v e 0 a n d D r i v e 1 )
and type u to display User1. Press <Tab> to
highlight each of the parameter fields in suc-
cession, and enter the appropriate number for
each fi el d.
NOTE: For EIDE devices such as EIDE
CD-ROM driv es and EIDE tape drives that are
usin g the bu ilt-in EIDE contr oller, set the
approp riate Driv e category to Auto.
R eserved Memory Designates a region of system board memory
that can be supplied by an expansion card.
This feature should not be enabled unless an
e xpansion card that requi res special address-
ing is ins talle d .
CPU Speed Indicat es processor speed at which system
boots—the processor’s rated speed or a
slow er compatibili ty speed.
Num Lock Determines whether keyboard’s Num L ock
mode is activated.
ACPI Controls the Advanced Configuration and
Power Interface. If the operati ng system sup-
ports ACPI and A CPI is tog gled to On, pressing
the power button momentarily places the sys-
tem in a power-saving mode. You can turn the
sy stem completely of f by pressing and holding
the power button for more than 4 seconds.
When ACPI is activated (On), IRQ9 is not avail-
able for use by expansion cards.