Removing and Replacing Parts on the Desktop Chassis 4-1

&+$37(5

5HPRYLQJDQG5HSODFLQJ3DUWVRQ

WKH'HVNWRS&KDVVLV

Thi s chapter p rovides procedures fo r remo ving the components, assembli es,
and subassemblies on the Dell Precision 410 desktop systems. If you are ser-
vicing a Dell Precision 410 mini tower system, refer to Chapter 5, “Removing
and Replacing Parts on the Mini Tower Chassis.”
Unless otherwise noted, each procedure assumes the following:
You have performed the steps in “Precautionar y Measures” found later in
this chapte r.
You have removed the computer cover.
You can replace or reinstall a part by performing the removal procedure in
reverse order unless addi tional infor mation is provided.

5HFRPPHQGHG7RROV

Most of the procedures in this chapter require the use of one or more of the
following tools:
Small flat-blade screwdriver
Wide flat-blade screwdriver
#1 and #2 Phillips-head screwdrivers
1/4-inch nutdri ver
Tweezers or long-nose pliers
Also, use a wrist grou nding st rap as e xpl ained in t he ne x t s ection, “P r ecaut ion-
ary Measures.”