
Removing and Replacing Parts on the Mini Tower Chassis 5-1
&+$37(5
5HPRYLQJDQG5HSODFLQJ3DUWVRQ
WKH0LQL7RZHU&KDVVLV
Thi s chapter provi des procedures for removing the components, assemblies,
and subassemblies in the Dell P reci sion 410 mini tower systems. If you are
servicing a Dell Precision 410 desktop system, refer to Chapter 4, “Removing
and Replacing Parts on the Desktop Chassis.”
Unless otherwise noted, each procedure assumes the following:
You have performed the steps in “Precautionary Measures” found later in
this chap ter.
You have removed the computer cover.
You can replace or reinstall a part by performing the removal procedure in
rev erse order unless additional inf o rmation is pro vided.
5HFRPPHQGHG7RROV
Most of the procedures in this chapter require the use of one or more of the
following tools:
Small flat-blade screwdriver
Wide flat-blade screwdriver
#1 and #2 Phillips-head screwdrivers
1/4-inch nutdriver
Tweezers or long-nose pliers
Also, use a wrist grou nding st rap as e xpl ained in t he ne x t s ection, “P r ecaut ion-
ary Measures.”