Dell 4688513 appendix Product Features, Identifying Parts and Controls, Front View

•Color calibration datasheet

•Product and Safety Information Guide

Product Features

The U3011 flat panel display has an active matrix, thin-film transistor (TFT), liquid crystal display (LCD). The monitor features include:

■756.23 mm (30 inches) viewable area display (measured diagonally).

■2560 x 1600 resolution, plus full-screen support for lower resolutions.

■Wide viewing angle (178°/178°) and superb grayscale tracking minimizes color deviations at biased angles of viewing (sitting, standing, or moving side- to- side) which ensures ultra-smooth color gradation.

■Tilt, swivel and vertical extension adjustment capabilities.

■Removable stand and Video Electronics Standards Association (VESA™) 100 mm mounting holes for flexible mounting solutions.

■Plug and play capability if supported by your system.

■On-Screen Display (OSD) adjustments for ease of set-up and screen optimization.

■Software and documentation media includes an information file (INF), Image color Matching File (ICM), and product documentation.

■Security lock slot.

■Compatible with xvYCC, Adobe RGB and sRGB color standards.

■Factory calibrated to an average delta E of < 5 under sRGB and Adobe RGB input source for brand-new Dell monitor U3011. Dedicated Custom Color Mode (6- axis Color-control) for Saturation, Hue, Gain (RGB) and offset (RGB).

■12-bit internal processing which tested HDMI1.3 with deep color (12-bit).

■7-in-1 USB 2.0 Card Reader (xD, SD/Mini SD, MS/HSMD/MSPRO, MMC).

■Supports VGA, DVI-D, DisplayPort, HDMI and Component video signals.

■Supports Picture by Picture (PBP) Select mode.

Identifying Parts and Controls

Front View

Front View	Front panel controls
Label	Description

1Shortcut Key 1 - Preset Modes (Default)

2Shortcut Key 2 - Brightness/Contrast (Default)