Security
Password Bypass | This option lets you bypass the System (Boot) Password and the internal HDD | |
| password prompts during a system restart. | |
| • Disabled — Always prompt for the system and internal HDD password when | |
|
| they are set. This option is disabled by default. |
| • Reboot Bypass — Bypass the password prompts on Restarts (warm boots). | |
| NOTE: The system will always prompt for the system and internal HDD passwords | |
| when powered on from the off state (a cold boot). Also, the system will always | |
| prompt for passwords on any module bay HDDs that may be present. | |
Password Changes | This option lets you determine whether changes to the System and Hard Disk | |
| passwords are permitted when an administrator password is set. W | |
| Allow | |
Computrace | This field lets you Activate or Disable the BIOS module interface of the optional | |
| Computrace Service from Absolute Software. Enables or disables the optional | |
| Computrace service designed for asset management. | |
| • Deactivate - This option is disabled by default. | |
| • | Disable |
| • | Activate |
Chassis Intrusion | Allows you to control the chassis intrusion feature. You can set this option to: | |
| • | Enable |
| • | Disable |
| • | |
CPU XD Support | Allows you to enable or disable the Execute Disable mode of the processor. This option | |
| is enabled by default. | |
OROM Keyboard Access | This option determines whether users are able to enter Option ROM Configuration | |
| screens via hotkeys during boot. Specifically, these settings are capable of preventing | |
| access to Intel RAID (CTRL+I) or Intel Management Engine BIOS Extension (CTRL+P/ | |
| F12) |
|
| • Enable — User may enter OROM configuration screens via the hotkey. | |
| • | |
|
| hotkeys on next boot only. After next boot, the setting will revert to disabled. |
| • Disable — User may not enter OROM configuration screens via the hotkey. | |
| This option is set to Enable by default. | |
Admin Setup Lockout | Allows you to enable or disable the option to enter Setup when an Administrative | |
| password is set. This option is not set by default. | |
37
