Dell 21DXJ, 4820 manual Reversing the Front Door optional

Reversing the Front Door (optional)

NOTE: Use a 4-mm Allen wrench to remove the front-door hinge bodies from the rack and reinstall them on the side opposite their original positions. You might need a stepladder in order to access the Allen bolt that secures the top hinge body to the rack.

To reverse the direction that the front door opens, complete the following steps:

1Remove the front door (see "Removing the Front Door" on page 8).

2Remove the side panels (see "Removing and Replacing the Side Panels" on page 12).

3Reverse the top hinge body.

a Pull the hinge pin upward slightly so that you can access the retention clip (see Figure 1-6).

b Using the needle-nose pliers, remove the retention clip, and slide the hinge pin out of the hinge body.

Installation Guide

15