5Install the coupling brackets.
a Position the two racks side by side.
b Adjust the leveling feet on both racks so that the racks are parallel and in the same horizontal plane. For instructions, see "Adjusting the Leveling Feet" on page 23.
c To install the coupling brackets on the racks, hook the brackets into the square holes inside and adjacent to the rack posts, and tighten the brackets using the wingnuts (see Figure
Figure 1-20. Coupling Two Racks
1
3
|
| 2 |
|
1 | coupling bracket locations | 2 | wingnut |
3 | coupling bracket (4) |
|
|
Installation Guide
35
