Installing the Rack Stabilizer Feet
WARNING: Installing systems in a rack without the front and side stabilizer feet installed could cause the rack to tip over, potentially resulting in bodily injury under certain circumstances. Therefore, always install the stabilizer feet before installing components in the rack.
Install stabilizer feet on the rack as follows:
•Install front and side stabilizer feet on a standalone rack.
•Install front stabilizer feet on all racks in a suite, and install left or right stabilizer feet on the racks at each end of a suite.
Installing the Front Stabilizer Feet
1Open the front door.
2Reach into the rack and pull up firmly on each stabilizer to detach them from the frame.
3Remove the plastic fasteners attached to the stabilizer feet.
4Position each front stabilizer foot against the base of the rack frame and align its holes with the corresponding holes in the frame.
5Use the provided bolts, washers, and cage nuts to secure each foot to the rack as shown in Figure
24
