26
www.dell.com | support.dell.com
Figure 1-18. User Security Model Table
Deleting an User Security Model Table Entry
1
Open the
SNMPv3 User Security Model
(USM)
page.
2
Click Show All. The
User Security Model Table
opens.
3
Select a
User Security Model Table
entry.
4
Check the
Remove
checkbox.
5
Click
Apply Changes
. The User Security Model Table entry is deleted, and the device is updated.
Defining SNMP Users Using CLI Commands
The following table summarizes the equivalent CLI commands for defining fields displayed in the
SNMPv3
User Security Model
page.
Table 1-6. SNMP User CLI Commands
CLI Command Description
snmp-server user
username groupname
[remote
engineid-
strin
g][auth-md5
password
| auth-sha
password
| auth-md5-
key
md5-des-key
|
auth-sha-key
sha-des-
key
]
Configures a new SNMP V3 user.
show snmp users
[
username
]
Displays the configuration of users.