47
Defining STP Global Parameters
1
Open the page.
2
Select
Enable
in the
Spanning Tree State
field.
3
Select the
STP
mode in the
STP Operation Mode
field, and define the bridge settings.
4
Click
Apply Changes
.
STP is enabled on the device.
Modifying STP Global Parameters
1
Open the page.
2
Define the fields in the dialog.
3
Click
Apply Changes
.
The STP parameters are modified, and the device is updated.
Defining STP Global Parameters Using CLI Commands
The following table summarizes the equivalent CLI commands for defining STP global parameters as displayed
in the
Spanning Tree Global Settings page.
Table 1-13. STP Global Parameter CLI Commands
CLI Command Description
spanning-tree Enables spanning tree functionality.
spanning-tree mode {stp
| rstp | mstp}
Configures the mode of the spanning tree
protocol.
spanning-tree priority
priority
Configures the spanning tree priority.
spanning-tree hello-time
seconds
Configures the spanning tree bridge Hello
Time, which is how often the device
broadcasts Hello messages to other devices.
spanning-tree max-age
seconds
Configures the spanning tree bridge
maximum age.
spanning-tree forward-
time
seconds
Configures the spanning tree bridge
forward time, which is the amount of time
a port remains in the listening and learning
states before entering the forwarding state.