27
The following is an example of the CLI commands:
Defining Communities
Access rights are managed by defining communities in the
Community Table
. When the community names are
changed, access rights are also changed. To open the SNMP Communities page, click
System
→
SNMP
→
Community
in the tree view.
Figure 1-19. SNMP Community
SNMP Management Station
— A list of management station IP addresses.
Community String
— Functions as a password and used to authenticate the selected management station to the
device.
Access Mode
— Defines the access rights of the community. The possible field values are:
Read Only
— The management access is restricted to read-only, for all MIBs except the community table,
for which there is no access.
console (config)
# snmp-server user John user-group auth-md5 1234
console (config)
# end
console (config)# show snmp users
Name Group Name Auth Method Remote
------- ---------- ----------- ------
John user-group md5