![](/images/new-backgrounds/1189248/18924857x1.webp)
Figure 1-21. Community Table
Deleting Communities
1Open the SNMP Community page.
2Click Show All.
The Community Table opens.
3Select a community from the Community Table.
4Select the Remove check box.
5Click Apply Changes.
The selected community entry is deleted, and the device is updated.
Configuring Communities Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the SNMP Community page.
Table 1-7. SNMP Community CLI Commands
CLI Command | Description |
string [ro rw su] [ip- access to SNMP protocol. address]
hostname} community- recipient. string [1 2]
show snmp | Checks the SNMP communities status. |
|
|
29