60
www.dell.com | support.dell.com
Defining MSTP Interface Settings
The
MSTP Interface Settings
page contains parameters assigning MSTP settings to specific interfaces. To open
the
MSTP Interface Settings
page, click
Switch
→
Spanning Tree
→
MSTP Interface Settings
in the tree view.
Figure 1-35. MSTP Interface Settings
Instance ID —
Defines the VLAN group to which the interface is assigned. Possible field range is 0-15.
Interface —
Assigns either ports or LAGs to the selected MSTP instance.
Port State —
Indicates whether the port is enabled or disabled in the specific instance.
Typ e —
Indicates whether MSTP treats the port as a point-to-point port, or a port connected to a hub, and
whether the port is internal to the MSTP region or a boundary port. If the port is a boundary port, it also
indicates whether the device on the other side of the link is working in RSTP or STP mode.
Role —
Indicates the port role assigned by the STP algorithm in order to provide to STP paths. The possible
field values are:
abort Exits the MST region configuration mode
without applying configuration changes.
show {current | pending}Displays the current or pending MST region
configuration.
Table 1-16. MSTP Instances CLI Commands
CLI Command Description