4 | AXIS 5400+/AXIS 5600+ User’s Guide |
|
Before You Start
This guide applies to the AXIS 5400+/AXIS 5600+ with firmware version 6.43 and higher. The following operating systems are covered in this guide:
•Windows 98, Windows Me, Windows NT, Windows 2000, Windows XP, Windows Server 2003
•Mac OS X
•UNIX/Linux
Note:
Installation instructions in this book cover the above operating systems over TCP/IP.
See the AXIS 5400+/AXIS 5600+ User’s Manual, located on www.axis.com for installation instructions regarding
•Windows over NetBIOS/NetBEUI
•NetWare over IPX/SPX and TCP/IP
•MacOS over Appletalk
The instructions in this guide are based on the settings found in a new and unconfigured AXIS 5400+/AXIS 5600+.
To reload the default parameters, you can perform a Factory Default, which will restore most settings to their default values. See Using the Test Button on page 26 for instructions.
