w w w . d e l l . c o m s u p p o r t . d e l l . c o m

If only part of the display is readable

C ONNECT AN EXTERNAL MONITOR

1 Turn off your computer and connect an external monitor to the computer.

2 Turn on the computer and the monitor, and adjust the monitor brightness and contrast controls.

If the external monitor works, the computer display or video controller may be defective. Contact Dell ("Contacting Dell" on page 100).

Scanner Problems

NOTE: If you can connect to your Internet service provider (ISP), your modem is functioning properly. If you are sure that your modem is working properly and you still experience problems, contact your ISP.

C HECK THE POWER CABLE CONNECTION Ensure that the scanner power cable is firmly connected to a working electrical power source and that the scanner is turned on.

C HECK THE SCANNER CABLE CONNECTION Ensure that the scanner cable is firmly connected to the computer and to the scanner.

U NLOCK THE SCANNER Ensure that your scanner is unlocked if it has a locking tab or button.

REINSTALL THE SCANNER DRIVER See the scanner documentation for instructions.

Drive Problems

NOTE: For information on saving files to a floppy disk, see the Dell Inspiron help file. To access the help file, see "Accessing Help" on page 65.

If you cannot save a file to a floppy drive

E NSURE THAT W INDOWS ® RECOGNIZES THE DRIVE Click the Start button and click My Computer. If the drive is not listed, perform a full scan with your antivirus software to check for and remove viruses. Viruses can sometimes prevent Windows from recognizing the drive. Insert a bootable disk and restart the computer. Verify that the light is blinking, indicating normal operation.

68

Solving Problems

Page 68
Image 68
Dell 600m, PP05L owner manual Scanner Problems, Drive Problems, If only part of the display is readable