Dell PP05L, 600m owner manual Adding and Replacing Parts

7Turn the computer over so that it is upright.

NOTICE: When the hard drive is not in the computer, store it in protective antistatic packaging. See your Product Information Guide for safety instructions.

8Pull the hard drive cover out of the computer.

9Remove the new drive from its packaging.

Save the original packaging for use when storing or shipping the hard drive.

NOTICE: You cannot replace your hard drive unless you open your display first.

10Ensure that the display is open approximately 2.54 cm (1 in).

NOTICE: Use firm and even pressure to slide the drive into place. If you force the hard drive into place using excessive force, you may damage the hard drive connector.

11Press the hard drive cover into the bay until it is fully seated in the bay.

12Turn the computer over. Use a small screwdriver to tighten the screw.

13Install the operating system for your computer.

14Install the drivers and utilities for your computer (see "Drivers" on page 73).

Adding and Replacing Parts

87