Dell 6224, 6224F, 6224P, 6248, 6248P Management

PowerConnect 6224/6224F/6224P/6248/6248P Release Notes

System Firmware Version 3.2.0.6 Page 31

Management

Description User Impact

radius-server mode commands do

not have a "no" form. None of the commands in radius-server mode support a "no" form except

for the msgauth command. To reset values to the default, delete the

server and add it back.

Description User Impact

Not able to set the value for

dellLanMngInfEnable Management ACLs are always enabled and cannot be disabled.

dot3StatsAlignmentErrors not

incrementing

The value for all ports shows up as 0.

agentInventoryStackReplicateSTK

object not working as expected Copies backup image of master to member instead of active image of

master.

agentStpPortRootGuard object Use agentStpCstPortRootGuard instead.

Description User Impact

Traffic Monitoring Chart Rate Display The chart displays a count rather than a rate.

Stacking Ports displayed on the

LLDP, LLDP-MED, and Voice VLAN

configuration pages

The interface selections available on the configuration pages contain the

stacking ports which are not applicable.

Browser-specific issue: On the

VRRP Router Configuration page,

the authentication type is not saved

when using Firefox v2.x.

To configure the authentication type, either upgrade the browser to Firefox

3.x or use the CLI.

Dell Management