PowerConnect 6224/6224F/6224P/6248/6248P Release Notes
LACP
Description | User Impact | |
LAGs Supported | Number of LAGs supported: | |
| • Up to 18 Dynamic LAGs | |
| • | 48 Static LAGs |
| Limitations (stack of 12) | |
| • | Long Timeouts |
|
| With a minimal CPU load, it takes approximately 1.5 minutes with |
|
| 16 dynamic LAGs and 15 MSTP instances for the ports to |
|
| become active with traffic running. |
| • | Short Timeouts |
|
| With a minimal CPU load, it takes approximately 1.5 minutes with |
|
| 12 dynamic LAGs and 15 MSTP instances for the ports to |
|
| become active with traffic running. |
VLAN |
|
|
Description | User Impact |
vlan association mac command | The maximum number of |
limitations |
|
Layer 3
IP Map
Description | User Impact |
ip default gateway and ip default | Ensure the correct command is used for the interface being configured. |
route are for different types of |
|
interfaces. ip default gateway is for |
|
the management interface and ip |
|
default route is for VLAN routing |
|
interfaces. |
|
DiffServ |
|
|
|
Description | User Impact |
Failed to attach diffserv policy to an | This behavior is a known limitation of the PowerConnect 6200 series |
interface with mark cos and assign | switches. |
queue attributes. |
|
System Firmware Version 3.2.0.6 | Page 29 |
