| Description |
|
| User Impact |
|
| Resolution |
|
|
|
|
|
|
|
|
| |||
| Changing Radius Timeout from |
| Changing the Timeout Duration field on the |
| Correct the API to properly set the | ||||
| Web interface inadvertently |
| RADIUS Server Configuration web page would |
| RADIUS priority. | ||||
| changes Priority to same value. |
| also change the Priority field to the same value. |
|
|
|
| ||
| Radius Servers always show |
| The RADIUS Server Status web page was |
| Retrieved the server status the same as | ||||
| active status. |
| always displaying the server’s status as active. |
| the CLI for each row in the web page | ||||
|
|
|
|
|
|
| display. | ||
| Interface Configuration web page |
| Interface Configuration web page restricted the |
| Changed the weg page IP MTI field do | ||||
| would not allow the user to set the |
| user to configure the IP MTU from |
| allow the following values to be | ||||
| MTU size to zero. |
|
|
|
| configured: 0 or | |||
| PCs or clients do not authenticate |
| Windows Vista clients were not getting re- |
| Modified the state machine to move to | ||||
| after reboot and logging back on |
| authenticated after the PC rebooted. |
| connecting state to trigger the sending of | ||||
| (802.1x). |
|
|
|
| the | |||
| Web Display of Rapid Spanning |
| The Rapid Spanning Tree Table web page |
| Corrected the web page backend API to | ||||
| Tree only displays first 10 interface |
| would only display the first 10, and potential |
| retireve all of the applicable interfaces. | ||||
| ports |
| incorrect interfaces. |
|
|
|
| ||
| Web Global Portfast applies |
| Activating global portfast from the Web |
| While applying Portfast via the GUI, no | ||||
| Portfast on trunk switchports |
| Interface applies portfast to trunk interfaces |
| check was present to know what the | ||||
|
|
|
| (Switching>Spanning_Tree>Global_Settings). |
| switchport access of a particular | |||
|
|
|
| When removing portfast globally via the CLI, it |
| interface was hence the portfast was | |||
|
|
|
| will not remove it from trunks. |
| being applied even on trunk switchports. | |||
| IGMP Snooping failing on PC6200 |
| Two copies of DLF/Bcast/Unknown unicast |
| Modified the driver layer to ignore this | ||||
| stack of two switches |
| packet will be sent out of the port 1 to 24 if two |
| |||||
|
|
|
| PC6248 switches are stacked using both the |
|
|
|
| |
|
|
|
| stack ports to form stack trunk. |
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
20 | System Firmware Version 3.2.0.6 |
