Appendix A Default Settings and Technical Specifications
Factory Default Settings
You can use the reset button located on the front of your device to reset all settings to their factory defaults. This is called a hard reset.
•To perform a hard reset, push and hold the reset button for approximately 5 seconds (until the TEST LED blinks rapidly). Your device will return to the factory configuration settings shown in the table below.
•Pressing the TEST LED for a shorter period of time will simply cause your device to reboot.
Feature | Description |
|
|
Smart Wizard | Enabled |
|
|
Gateway Login |
|
| Gateway Login URL | http://192.168.0.1 |
| Login name | admin |
| Password | password |
| Parental login name | superuser |
| Parental password | password |
Internet Connection |
| |
|
|
|
| WAN MAC Address | Use Default hardware address |
|
|
|
| MTU Size | 1500 |
|
|
|
Local Network |
| |
|
|
|
| LAN IP Address (aka Gateway IP address) | 192.168.0.1 |
| Gateway Subnet Mask | 255.255.255.0 |
| DHCP Server | Enabled |
| LAN IP Starting IP Address | 192.168.0.10 |
1.0, November 2006
