NETGEAR CVG824G manual WPA-PSK WiFi Protected Access Pre-Shared Key

Wireless Cable Voice Gateway Model CVG824G Reference Manual

Note: If you use a wireless computer to configure WEP settings, you will be disconnected when you click Apply. Reconfigure your wireless computer to match the new

settings, or access the wireless voice gateway from a wired computer to make further changes.

WPA-PSK (WiFi Protected Access Pre-Shared Key)

Not all wireless adapters support WPA-PSK. Furthermore, client software is required on the client. Windows XP and Windows 2000 with Service Pack 3 or above do include the client software that supports WPA. Nevertheless, the wireless adapter hardware and driver must also support WPA.

Consult the product document for your wireless adapter and WPA client software for instructions on configuring WPA settings.

To configure WPA-PSK:

1.From the Wireless Settings page, select WPA-PSK.

Figure 2-4

2.In the Passphrase Key field under Security Encryption (WPA-PSK), enter a word or group of printable characters and the Key Lifetime.

The Passphrase must be 8 to 63 characters in length. The 256 Bit key used for encryption is generated from this passphrase.

3.Click Apply to save your settings.

2-8 Wireless Configuration

v1.0, November 2006