|
| Wireless Cable Voice Gateway Model CVG824G Reference Manual | |
|
|
| |
Table | |||
|
|
| |
Label | Activity | Description | |
|
|
| |
Wireless | Green Solid | The wireless connection is operating normally. | |
|
|
| |
| Green Blink | Data is being transmitted or received on the wireless interface. | |
|
|
| |
| Off | No wireless link is detected. | |
|
|
| |
USB Port | Green Solid | A USB device is connected to the USB port. | |
|
|
| |
| Off | No USB device is connected. | |
|
|
| |
Voice Ports | Green Solid | Registered with the Call Agent. | |
(1 and 2) |
|
| |
Green Blink | There is an active call. | ||
| |||
|
|
| |
| Green Slow | Phone is | |
| Blink |
| |
|
|
| |
| Off | No phones are connected to the voice port. | |
|
|
| |
LAN (Local | Green On | The Local port has detected link with a 100 Mbps device. | |
Area Network) |
|
| |
Green Blink | Data is being transmitted or received at 100 Mbps. | ||
|
|
| |
| Amber On | The Local port has detected link with a 10 Mbps device. | |
|
|
| |
| Amber Blink | Data is being transmitted or received at 10 Mbps. | |
|
|
| |
| Off | No link is detected on this port. | |
|
|
| |
The Gateway Rear Panel
The label on the bottom of the gateway identifies the connections on the rear panel. The rear panel includes the following connections, viewed from left to right, as illustrated in Figure
•Wireless Antenna: The gateway ships with the wireless antenna already attached.
•Power: AC power adapter input.
•Reset button: Resets the gateway to its factory defaults.
•Four Ethernet LAN ports: Use these ports to connect local computers.
•USB port: If the USB driver is installed, you can connect a local computer to this port.
•Coaxial cable connector: Attach coaxial cable to the cable service provider’s connection.
•Two Voice/Phone ports: With VoIP service, connect one or two handsets to these ports.
Installing the Gateway |
v1.0, November 2006
