Installing the Voice Gateway

Wireless antenna

USB port

AC power adapter input

Figure 1-2

Reset button

Coaxial cable to your cable service provider

Voice/phone ports to connect handsets

Four Ethernet LAN ports to connect local computers

Installation is a four-part process. Complete the installation in this order:

1.Check the Installation Requirements. See “Installation Requirements” on page 1-4.

2.Connect the Gateway. See “Connecting the Wireless Voice Gateway” on page 1-5.

3.Log in to the Gateway. See “Logging In To the Wireless Voice Gateway” on page 1-7.

4.Connect to the Internet. See “Connecting to the Internet and VoIP” on page 1-8.

After installation, set up the wireless connection as explained in Chapter 2, “Wireless Configuration”.

Installation Requirements

Check the requirements listed below before installing the gateway:

•Local Computer. During installation, you need a local computer to connect to the gateway via Ethernet or USB.

– This computer should be set up to access the cable modem Internet service.

1-4	Installing the Gateway

v1.0, November 2006