NETGEAR CVG824G manual Configuring Your Wireless Card Access List

Wireless Cable Voice Gateway Model CVG824G Reference Manual

Figure 2-7

2.Enter the WPA2 settings.

These settings are required for communication and authentication from a Radius server. A secondary Radius server can be configured, which is used if the primary Radius server fails.

•Primary Radius Server IP Address: The IP address of the Radius server. The default is 0.0.0.0

•Radius Port: Port number of the Radius Server. The default is 1812.

•Radius Key: This is shared between the gateway and the Radius Server during authentication.

3.Click Apply to save your settings.

Configuring Your Wireless Card Access List

By default, any wireless PC that is configured with the SSID and WEP/WPA settings has access to your wireless network. For increased security, you can restrict access to the wireless network to only allow specific PCs based on their MAC addresses.

Wireless Configuration 2-11

v1.0, November 2006