Dell 6224F, 6248P, 6224P specifications ¾ bridge address Command Changed

¾ip route Command Changed

The syntax of the ip route command has changed. The metric keyword is no longer accepted as it had no effect. The new syntax is:

ip route ip addr subnetmask prefix-length nextHopRtr [ preference ]

¾distance ospf Command Changed

The distance ospf command has been changed (for both OSPFv2 and OSPFv3) to the industry standard syntax. The new syntax is:

distance ospf {external inter-area intra-area } distance

¾ip mtu Command Changed (Maximum Value Increased)

The maximum value for the ip mtu command has increased from 1500 to 9202. If not configured, the IP MTU tracks the interface MTU.

¾bridge address Command Changed

The following bridge address command optional parameters have been deprecated:

•delete-on-reset

•delete-on-timeout

•secure

¾port security Command Changed

The following port security command optional parameters have been deprecated:

•forward

•discard-shutdown

¾Link Dependency Available

The Link Dependency feature which has previously only been available on modular switches is now available on all switches. The functionality is similar to the capability available on the PCM6220, PCM8024, and the PCM6348.

This release added an action capability to link-dependency where if a dependant port goes down, as an action option, the group’s members come up versus also go down. This can be used as a form of link redundancy as an alternative to using STP.

¾ISDP Advertise/Display hostname

ISDP can now use the hostname as the Device ID instead of the Serial Number. The user needs to change the default hostname on the switch and can verify the results via the show isdp command.

12 System Firmware Version 3.2.0.6