Dell 7000 manual LJXUH5HOHDVLQJD=,&RQQHFWRU

￿

)LJXUH￿￿￿￿￿￿￿￿5HOHDVLQJ￿D￿=,)￿&RQQHFWRU

2.Pull up gently on the movable part of the connector until the cable is released.

3.Grasp the cable and pull it out of the connector.

To reconnect an interface cable to a ZIF connector, follow these steps:

1.Use the flat-blade screwdriver or dental pick to open the movable part of the ZIF connector.

2.Orient the end of the cable with the ZIF connector, and insert the end of the cable into the connector.

3.While holding the cable in place, close the ZIF connector.

To ensure a firm connection, make sure that the ZIF connector is completely closed.

Removing and Replacing Parts 4-9