Dell 7000 manual Lvsod\$Vvhpeo

'LVSOD\￿$VVHPEO\

This section provides the removal procedure for the display assembly.

6-mm screws (4)

hinges (2)

hinge saddles (2)

LCD wire harness

connector

JP3

)LJXUH￿￿￿￿￿￿￿￿'LVSOD\￿$VVHPEO\￿5HPRYDO

This procedure assumes that you have removed the keyboard and thermal shield. To remove the display assembly from the computer, follow these steps (see Figure 4-24):

1.Disconnect the LCD wire harness from connector JP3.

Use a dental pick or flat-blade screwdriver to pry up each end of the con- nector to release it.

2.Close the display.

3.Remove the four 6-mm screws that secure the two hinges.

4.Unlatch the display assembly and lift the assembly off the computer base.

Removing and Replacing Parts 4-37